Beads for a Milwaukee Brewers Rosary

Navy strands for Rosary Guy. Photo credit: Michelle at JSM Bead Coop.

I am considering making a rosary in the colors of the Milwaukee Brewers baseball team. I have discovered that it is not going to be as easy as I first thought, because navy colored beads are hard to come by and navy colored beads in simple rounds or oval shapes are even harder to find.

My local bead store, JSM Bead Coop had a few suggestions for me, as seen above. The strands from top to bottom are:

1. Night Blue Swarovski (glass) pearls 6 mm. These are a little darker than the Brewers' navy color, and have just a hint of red in them, making them look slightly purple. They have a slight pearlescent shimmer to them, but not as much as other Swarovski pearls because these are so dark. These are available in both strands and loose, so it will be possible to buy only the number of pearls I need.
2. Opaque navy "twists" rhombus (diamond) shapes twisted along their axis. they are about 8 mm in length. They have a high gloss. They are the Navy color used by the Brewers. There are 16 of them in a strand. I would need 4 strands to make a rosary.
3. Matte navy "pillows". These have a non-glossy finish and each bead is about 8mm x 10mm x 2mm. They are close to the Brewers' navy color. There are 26 to a strand. I would have to buy 3 strands to make a rosary.
4. I am not sure what to call the shape of this bead, they are rectangular prisms with all eight corners cut off to give them a faceted look. Let's call them "faceted rectangles".  They are made with 2 colors of glass fused together (crystal clear and navy, the navy is slightly darker than brewer navy). I am guessing they are about 9mm x 5 mm x 3mm. 22 to a strand. I would need to buy 3 strands to make a rosary.
5. Larger rhombus twists like the ones in strand #2 , about half-again as large in each direction. To use them just as the HM beads, I would need 5 strands. If I wanted to use them for both the OF beads and the HM beads, I would need 6 strands.
6. The same glossy opaque navy glass as in strands 2 and 5, these are somewhat cube shaped with the edges and corners so well rounded as to make them resemble globes as much as cubes. they are drilled from vertex to opposite vertex and they are about 12 or 13 mm long. (half an inch). There are 17 to a strand. I would need 4 strands to make a rosary.
7. The bottom 3 strands are made of cobalt glass. #7 looks brighter in color than the next two because it is a little thinner and so more light passes through in this picture. These are a rich (slightly purple) blue color. #7 is a 6mm round (that is, a sphere). There are 50 on a strand. I would need 2 strands to make a rosary.
8. these are irregular cobalt cubes about 10 mm. they are drilled from center of a face to the center of the opposite face. There are 25 per strand. I would need 3 strands to make a rosary.
9. These are 8mm rounds (spheres). There are 25 per strand. I would need 3 strands to make a rosary.

What do you think? which would you choose for a Brewers rosary?

amethyst dyed Mexican onyx - after

The original beads had a large center hole, and were shaped somewhat like donuts. I found some similarly colored pressed glass beads that were "flying saucer" shaped, close enough in shape, though not a perfect match. They were as big, or slightly bigger than the largest of the remaining original beads. I would call the color of the new beads "vanilla/raspberry-swirl." I chose some cathedral beads in the same white/purple glass for the Our-Father beads.

I had almost enough original beads for all the Hail-Mary beads on the circlet, so I put 3 of the new Hail-Mary beads on the drop and then sorted the original beads by width, graduating the beads from the largest, near the centerpiece, to the smallest, on the opposite side of the circlet. The only new Hail-Mary bead on circlet could then be placed just on the other side of the centerpiece from the largest original bead, where it blends in very well.

I strung each of the original beads on top of 4 #15 silver-lined crystal seed beads. This was to fill the large hole in the donut-shaped beads, keeping the bead centered on the beading cable, and limiting the amount of wobble, to which the bead is subject. I added the centerpiece. I don't think the original ever had one. I used a nickel-silver Fatima centerpiece from Our Lady's Rosary Makers. I made a wrapped-wire bail for the cross from 18 gauge nickel-silver craft wire.

two Anglican rosaries

I made an Anglican rosary suitable for a man. I used 9x7mm black oval wooden beads for the week beads, and 10mm howlite globes for the invitatory and cruciform beads. The cross is carved from black horn. The rosary is cable-strung and the beads are fixed in place by separating them with matte black seed-beads. I showed it to a friend of a friend who prays the Anglican rosary. She was taken with its large size and soft, flexible drape (apparently the one she uses is small and stiff). She said she liked it, but wondered if I could make something more feminine. The result is the pink Anglican rosary at the top of the picture. For week beads I used frosted pink 10mm drucs with a partial AB finish. It uses the same 10mm howlite globes for the invitatory and cruciform beads. It is cable-strung and the beads are fixed in place with silver-lined crystal seed beads. The ornate base-metal cross has a faux oxidized silver finish.

Lutheran prayer beads

This week I made these two sets of Lutheran prayer beads. The larger set is the "Lutheran rosary" or "Lutheran Lenten Chaplet" of the same kind I made back in February. The smaller one is called the Wreath of Christ - Frälsarkransen or Savior Ring.

For the Lenten Chaplet, I got the black cross from my local bead store (JSM Bead Coop). It is carved from horn. The cable is covered with #15 matte black seed-beads from JSM. The small black beads (the weekday beads) are 7 millimeter wooden ovals [AMC #522] from Ave Maria's Circle. They slide on the cable as your fingers move over them in prayer. The larger black and gray globes (the Sunday beads) are fixed in position on the cable. They are snowflake obsidian and come from JSM too. The large white globe (the Easter bead) is howlite, and also comes from JSM.

The largest bead on the Savior Ring is the gold God bead. I used a gold colored globe of dichroic glass from JSM. Next largest in size are the seven 8mm rounds. Five of them are glass druks from JSM, and two are glass pearls [OLRM #655] from Our Lady's Rosary Makers. The 6mm rounds are Swarovski glass pearls. There are also six 5x9mm clear glass ovals from JSM. For an explanation of how these beads are prayed, go here.

turquoise Our Lady of Guadalupe rosary